Size 80mm GB Standard Carbon Steel Body Flanged Swing Check Valve

Product introduction

Swing type steel check return valve is suitable for pressure 1.6~25MPa/2.0-42.0MPa working temperature -29~+550℃ oil, chemical, pharmaceutical, chemical fertilizer, power industry and other conditions of the pipeline, the applicable medium for water, oil, steam, acid medium. It is a valve that controls the one-way flow of medium in the pipeline to prevent the backflow of medium in the pipeline. Check valves belong to automatic valves. The opening and closing parts are opened or closed by the power of the flowing medium. Check valves are only used for one-way flow of medium in the pipeline, to prevent media reflux, in case of accidents. Mainly used in petroleum, chemical, pharmaceutical, chemical fertilizer, electric power and other pipelines

Main part material

Connect size

Action principle

The valve is composed of body, cover, disc, rocker and rocker shaft and other parts, the disc can automatically prevent fluid backflow. The disc of the valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side. When the inlet pressure is lower than the outlet pressure, the disc will automatically close to prevent media backflow under the action of the fluid pressure difference and its own gravity.

The valve features

1. Fluid resistance is small, the sealing surface by the medium's hand brush and small erosion.

2. Simple shape, good manufacturing technology, wide range of application.

3. The limited position device in the body cavity prevents the opening position of the valve disc from being too high to be closed, so that the operation performance of the machine is more stable

4. During installation, the medium flow direction is consistent with the arrow direction on the valve body.

Instructions for storage, installation and use

1. The valve should be placed in a dry warehouse and is strictly prohibited to be stored in the open air.

2. Long-term storage should be maintained regularly.

3. Operating conditions shall meet the requirements of performance specifications.

4. Pressure test should be carried out before installation, and installation can only be performed if it meets the requirements.

5. The pipe and valve cavity should be cleaned before installation.

6. The product shall not be subject to large external force after installation.

7. The valve is usually installed in the horizontal pipeline, but can also be installed in the vertical pipeline or inclined pipeline, and pay attention to the medium flow direction and the arrow direction on the valve body consistent.

Yuanda Valve Group Co., Ltd., founded in 1994, is headquartered in Yincun, Longyao, Hebei, China, the hinterland of Bohai Economic Rim surrounding Beijing and Tianjin. With a registered capital of RMB 200 million, Yuanda currently has 8 subsidiaries, of which 6 are in China and 2 overseas. Among them, the core company, which covers an area of 540,000m2 and has more than 3500 employees, is the largest high,midium and low-pressure valve manufacturing base specializing in valve development, manufacturing, and sales in China.

Yuanda has obtained DNV·GL, ISO9001: 2015、ISO14001:2015、OHSAS18001:2007, API6D（6D-0759）, CE, KS, and EAC certifications. Its""trademark is evaluated as Famous Trademark of China and Famous Brand in Hebei Province, and the product series produced under"" is a trademark registered in Korea and products produced under this trademark enjoy a good reputation in both international and domestic markets. Yuanda has been named “Credit Management AA-Rating Enterprise” by the General Administration of Quality Supervision, Inspection and Quarantine and granted the title of “China Quality Trustworthy Enterprise” by China Entry and Exit Inspection and Quarantine Association. It is also a holder of Manufacture License of Special Equipment Level A and Casting Certificates Grades B, B1, and B2, and a member of China Valve Association council, a corporate member of China Foundry Association, and a provincial enterprise technology center in Hebei. Yuanda has been granted the power to carry out import and export operations on its own and is an approved supplier of PetroChina (CNPC) and Sinopec, Guodian, Huaneng, Huadian, Datang and China Power, and China Aluminum, CCESCC, Shougang, Wuhan Iron and Steel Company, and Hebei Iron and Steel Company.

Yuanda manufactures to standards including GB/JB(china), ANSI, API, AWWA, DIN, BS, JIS, EAC, NF and so on, and uses HT200, HT250, QT400, QT450, WCA, WCB, WCC, CF3, CF8, CF3M, CF8M, 1Cr5Mo, LCB, among others, to produce a great variety of valves including gate valves, globe valves, ball valves, butterfly valves, check valves, diaphragm valves, pressure-relief valves, plug valves, and traps, which are available in 12 main categories, 200 series and 4000 specs, totaling 120,000 tons a year. These products are widely used in all civil sectors covering petroleum, petrochemical, chemical, power generation, metallurgy, water system, pharmaceuticals, urban construction, and water supply and drainage.